null

Parker Velcon CLEANDiesel® 6 in. x 27 7/8 in. DI Coalescer Filters - 10 Micron

SKU:
PVDI628D10TB
Manufacturer:
O.D.:
6 in.
Length:
27 7/8 in.
Capacity:
10 Micron
Type:
Water and Particulate
Weight:
4.00 LBS

As Low As:

$315
Parker Velcon CLEANDiesel® 6 in. x 27 7/8 in. DI Coalescer Filters - 10 Micron

Parker Velcon CLEANDiesel® 6 in. x 27 7/8 in. DI Coalescer Filters - 10 Micron

SKU:
PVDI628D10TB
Manufacturer:
O.D.:
6 in.
Length:
27 7/8 in.
Capacity:
10 Micron
Type:
Water and Particulate
Weight:
4.00 LBS

As Low As:

$315

Velcon’s DI coalescers in combination with DSO separators, contaminated fuels are cleaned to a level that meets stringent downstream fuel cleanliness standards for petroleum based diesel fuels.

The first stage in the DI coalescer removes particles through an inside-out flow and coalesces emulsified water into large droplets, which then fall to the housing sump.

In the second stage, an outside-in process, the DSO separator creates a hydrophobic barrier to block the coalesced water droplets from flowing downstream of the housing.

This multi-stage design assures the fuel is conditioned to a clean and dry state, ready for use.

Surfactants:
  • Water coalescing is not effective in the presence of fuels containing high levels of surfactants/alcohols or unrefined biofuels
  • Detergents and additives inhibits the ability of coalescers to effectively remove water by reducing Interfacial Tension (IFT) and can eventually disarm coalescers

Features

  • Extended equipment up-time
  • Reduced operating costs
  • Reliable fuel injector performance
  • Reduced fuel system maintenance

Specifications

  • Filter Type: Coalescer
  • Brand: CLEANDiesel®
  • Fluid Compatibility: Petroleum Based Diesel Fuels
  • Micron Rating: 10 - Provides effective particle removal with industry proven coalescing technology
  • Inside Diameter: 3.5 in.
  • Outside Diameter: 6 in.
  • Length: 27.875 in.
  • Filter Construction: Fiberglass
  • End Cap Configuration: Threaded Base
  • Seal Material: Buna-N
  • pH Range: 5 - 9 - Continuous Operation
  • Flow Rate: Depends on Fluid Viscosity and Application
  • Maximum Burst Pressure: 75 PSI (5.2 Bar)
  • Maximum Operating Temperature: 150°F (65°C)
  • Changeout Pressure Differential: 25 PSI (1.7 Bar)
  • Downstream Free-Water Level Typically Below 50 ppm
  • DI - Coalescer Flow Direction - Inside to Outside
  • DSO - Separator Flow Direction - Outside to Inside